PRACA ORYGINALNA
Investigations of dynamic phenomena of precision length measurement system
1
Department of Mechanical and Material Engineering, Vilnius Gediminas Technical University, Lithuania
2
Institute of Mechanical Science, Vilnius Gediminas Technical University, Lithuania
3
Projekty Badawcze, Łukasiewicz Research Network – Automotive Industry Institute
Data nadesłania: 21-07-2020
Data ostatniej rewizji: 25-09-2020
Data akceptacji: 29-09-2020
Data publikacji: 13-10-2020
Autor do korespondencji
The Archives of Automotive Engineering – Archiwum Motoryzacji 2020;89(3):51-59
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The development of the automotive industry is conditioned by the application of production technologies, which directly depend on production volumes. Today's development of car production is possible only in conjunction with the volume of production, ensuring both the parameters of assembly and production quality. Their constant monitoring is related to the application of the verification tools and technologies used. Such is the length measurement process that needs to be precise in the automotive industry.The paper analyzes the precision length measurement system and its dynamic characteristics. The research is applied to solve the problems of dynamic processes of a precision length measuring system, and the obtained results can be used in the development of precision systems for other purposes. The obtained results describe the vibrations of the length measuring system housing and the measuring head, which show the weak points of the system at the respective frequencies. The paper analyzes the precision length measurement system and its dynamic characteristics. The obtained results describe the vibrations of the length measuring system housing and the measuring head, which show the weak points of the system at the respective frequencies.
REFERENCJE (9)
1.
Erkorkmaz K., Chen Q.G., Zhao M.Y., Beudaert X., Gao X.S.: Linear programming and windowing based feedrate optimization for spline toolpaths. CIRP Annals. 2017, 66, 393–406, DOI: 10.1016/j.cirp.2017.04.058.
2.
Gurauskis D., Kilikevičius A., Borodinas S., Kasparaitis A.: Analysis of geometric and thermal errors of linear encoder for real-time compensation. Sensors and Actuators A: Physical. 2019, 296, 145–154, DOI: 10.1016/j.sna.2019.06.055.
3.
Yu J., Wang Q., Zhou G., He D., Xia Y., Liu X.: Analysis of the Subdivision Errors of Photoelectric Angle Encoders and Improvement of the Tracking Precision of a Telescope Control System. Sensors. 2018, 18, 2998, DOI: 10.3390/s18092998.
4.
Lyu D., Liu Q., Liu H., Zhao W.: Dynamic error of CNC machine tools: a state-of-the-art review. The International Journal of Advanced Manufacturing Technology. 2020, 106, 1869–1891, DOI: 10.1007/s00170-019-04732-9.
5.
López J., Artés M.: A New Methodology for Vibration Error Compensation of Optical Encoders. Sensors. 2012, 12, 4918–4933, DOI: 10.3390/s120404918.
6.
López J., Artés M., Alejandre I.: Analysis of optical linear encoders’ errors under vibration at different mounting conditions. Measurement. 2011, 44, 1367–1380, DOI: 10.1016/j.measurement.2011.05.004.
7.
Kuester M., Intaratep N., Borgoltz A.: Laser Displacement Sensors for Wind Tunnel Model Position Measurements. Sensors. 2018, 18, 4085, DOI: 10.3390/s18124085.
8.
Weixin H., Cao Y., Yang J., Shang H., Wang W.: An error prediction model of NC machining process considering multiple error sources. The International Journal of Advanced Manufacturing. 2018, 94, 1689–1698, DOI: 10.1007/s00170-016-9867-7.
9.
Zhong W., Luo X., Chang W., Ding F., Cai Y.: A real-time interpolator for parametric curves. International Journal of Machine Tools and Manufacture. 2018, 125, 133–145, DOI: 10.1016/j.ijmachtools.2017.11.010.
Korzystamy z plików cookie (oraz innych podobnych technologii) i przetwarzamy unikalne identyfikatory oraz dane przeglądarki – w celu umożliwienia funkcjonowania naszej strony internetowej. Więcej informacji o tym jak przetwarzamy Twoje dane osobowe znajdziesz w
